This Article Full Text (PDF) All Versions of this Article: 1045389X08098096v1 20/5/529    most recent References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Web of Science (1) Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Erturk, A. Articles by Inman, D. J. Search for Related Content Social Bookmarking                         What's this?

Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs

Department of Engineering Science and Mechanics, Center for Intelligent Material Systems and Structures Virginia Tech, Blacksburg, VA 24061, USA, erturk{at}vt.edu

Jamil M. Renno

Department of Mechanical Engineering, Center for Intelligent Material Systems and Structures, Virginia Tech, Blacksburg, VA 24061, USA

Daniel J. Inman

Department of Mechanical Engineering, Center for Intelligent Material Systems and Structures, Virginia Tech, Blacksburg, VA 24061, USA

Cantilevered piezoelectric energy harvesters have been extensively investigated in the literature of energy harvesting. As an alternative to conventional cantilevered beams, this article presents the L-shaped beam-mass structure as a new piezoelectric energy harvester configuration. This structure can be tuned to have the first two natural frequencies relatively close to each other, resulting in the possibility of a broader band energy harvesting system. This article describes the important features of the L-shaped piezoelectric energy harvester configuration and develops a linear distributed parameter model for predicting the electromechanically coupled voltage response and displacement response of the harvester structure. After deriving the coupled distributed parameter model, a case study is presented to investigate the electrical power generation performance of the L-shaped energy harvester. A direct application of the L-shaped piezoelectric energy harvester configuration is proposed for use as landing gears in unmanned air vehicle applications and a case study is presented where the results of the L-shaped — energy harvester — landing gear are favorably compared against the published experimental results of a curved beam configuration used for the same purpose.

Key Words: piezoelectricity • energy harvesting • unmanned air vehicles.

This version was published on March 1, 2009

Journal of Intelligent Material Systems and Structures, Vol. 20, No. 5, 529-544 (2009)
DOI: 10.1177/1045389X08098096


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?