This Article Full Text (PDF) References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Hall, D. L. Articles by Flatau, A. B. Search for Related Content Social Bookmarking                         What's this?

One-Dimensional Analytical Constant Parameter Linear Electromagnetic-Magnetomechanical Models of a Cylindrical Magnetostrictive (Terfenol-D) Transducer

Alison B. Flatau

Department of Aerospace Engineering and Engineering Mechanics, Iowa State University, Ames, IA 50011

A method is presented for including motional and eddy current effects when analytically modeling electrical impedance functions of cylindrical magnetostrictive transducers. To approximate eddy current effects, onedimensional analytical constant parameter linear electromagnetic models of a cylindrical magnetostrictive transducer are developed. Maxwell's equations are solved for the magnetic field strength as a function of radial position. Closed form expressions for magnetic flux as a function of radial position are then derived, from which transducer electrical impedance functions are formulated. Two different physical models of the transducer are considered. The first model results in the classic eddy current solution for a rod in a wound wire solenoid. The second physical model includes the effects of a conducting external cylindrical housing. Motional effects are incorporated into the electromagnetic models via the magnetomechanical model, which is a frequency and load dependent, complex valued expression for the "dynamic magnetic permeability" of the magnetostrictive material within the transducer. The functional form for this dynamic magnetic permeability is derived by comparing the transduction equations for the magnetostrictive material with those for the transducer containing the material. Electrical impedance functions for both physical models are compared with an experimental measurement for a particular magnetostrictive transducer (using Terfenol-D) in its low signal linear range of operation. The second physical model was found to offer the better simulation of the experimental measurement of the transducer's electrical impedance, with errors in magnitude or phase of less than + 5% for excitation frequencies between 100 and 10,000 Hz (the asrun mechanical resonant frequency was 8800 Hz). Experience has shown that measured material parameters typically yield simulations of electrical impedance functions within i 10%. Predictions of electrical impedance functions for Terfenol-D transducers, calculated based on estimated or published Terfenol-D parameters, can be in error by well over 40%. Thus, the accuracy of model results seem to be controlled primarily by the accuracy with which magnetostrictive material parameters are known.

Journal of Intelligent Material Systems and Structures, Vol. 6, No. 3, 315-328 (1995)
DOI: 10.1177/1045389X9500600303


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?

This article has been cited by other articles:

				R. Pomirleanu and V. Giurgiutiu High-Field Characterization of Piezoelectric and Magnetostrictive Actuators Journal of Intelligent Material Systems and Structures, March 1, 2004; 15(3): 161 - 180. [Abstract] [PDF]