This Article Full Text (OnlineFirst PDF) All Versions of this Article: 1045389X09104390v1 20/10/1233    most recent Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Sarles, S. A Articles by Leo, D. J. Search for Related Content Social Bookmarking                         What's this?

Tailored Current-Voltage Relationships of Droplet-Interface Bilayers Using Biomolecules and External Feedback Control

¹ Virginia Poly Inst & State University, PO Box 90001, Blacksburg, VA 24061, USA
² Virginia Tech, Center for Intelligent Material Systems and Structures, Dept. of Mechanical Engineering, Virginia Tech, 310 Durham Hall, Blacksburg, VA, USA

^* To whom correspondence should be addressed. E-mail: sarles{at}vt.edu.

	Abstract

The development of a new class of active material based on the ion transport properties of functional biomolecules is introduced in this work. The new class of materials utilizes a recently developed technique known as the droplet-interface bilayer (DIB) to enable the reconstitution of biomolecules into a durable matrix. Methods to modify the current–voltage relationship across the bilayer, including the incorporation of proteins and the use of an external feedback loop, are explored. Electrical impedance spectroscopy and cyclic voltammetry measurements are used to characterize the bilayers and indicate that a single DIB can be modeled as a resistor in parallel with a capacitor. Alpha-hemolysin proteins from Staphyloccus aureus cause a reduction in the resistance of the bilayer and exhibit current-rectification at positive cis potentials. Alamethicin proteins from Trichoderma viride produce a voltage-dependent conductance allowing the specific resistance (M cm²) of the bilayer to be varied reversibly by 2–3 orders of magnitude. Feedback integral current control is demonstrated on pure 1,2-diphytanoyl-sn-glycero-3-phosphocholine DIBs and provides accurate current tracking at a driving rate of 10 mHz and less. Proportional–integral voltage control applied to a DIB establishes a second-order frequency response where the natural frequency and damping ratio of the resonance can be selected.

First published on April 27, 2009, doi:10.1177/1045389X09104390

Journal of Intelligent Material Systems and Structures 2009;20:1233.

A more recent version of this article appeared on July 1, 2009


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?